PRODUCT
Magnesium alloy ingot AM50
AM50: With a lower aluminum content than AM60 this alloy offers a further increase in ductility but at a slightly reduced strength and a slight reduction in castability. It is typically used where the performance requirements demand elongation properties beyond that of AM60.
|
Chemical Composition |
AM50A |
|
Mg |
Remainder |
|
Al |
4.5-5.3% |
|
Mn |
0.28-0.50% |
|
Zn |
<0.20% |
|
Si |
<0.05% |
|
Cu |
<0.008% |
|
Ni |
<0.001% |
|
Fe |
<0.004% |
|
Others each impurity |
0.01% |
Magnesium aloy ingot Specification:
AM50, AZ91D, AZ91E, AZ91HP, AZ31, AZ10, AM60, AM20 etc
Size:
5kg, 6 kg, 7.5kg, 8kg, 8.5kg, 12kg or as client's requirement.
Magnesium alloy characteristics:
The lightest of all structural metals
Excellent stiffness and strength-to-weight ratio
Outstanding EMI & RFI shielding properties
High conductivity, electrical and thermal
Withstands high operating temperatures
Cost-effective compared with many engineered thermoplastic materials
High dimensional accuracy and stability
Exceptional thin wall capability
Good environmental corrosion resistance
Good finishing characteristics
Full recyclability
Packing: About 1 MT with fumigation pallet, bundled by steel strip and covered with strong wrap film.
